Boot settings, Quiet boot, Fast boot – IBASE MI953 User Manual
Page 45: Setup prompt timeout, Bootup numlock state, Gatea20 active, Option rom messages, Interrupt 19 canture, Enables/disables quiet boot option, Select the keyboard numlock state
BIOS SETUP
MI953 User’s Manual
41
Boot Settings
This section allows you to configure the boot settings according to your
preference.
Aptio Setup Utility
Main Advanced
Chipset
Boot
Security
Save & Exit
Boot Configuration
→ ←
Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit
Quiet Boot
Disabled
Fast Boot
Disabled
Setup Prompt Timeout
1
Bootup NumLock State
On
CSM16 Module Version
07.60
GateA20 Active
Upon Request
Option ROM Messages
Force BIOS
Interrupt 19 Canture
Disabled
Boot Option Priorities
Boot Option #1
SATA: ATAPI iH…)
Hard Drive BBS Priorities
Quiet Boot
Enables/Disables Quiet Boot option.
Fast Boot
Enables/Disables boot with initialization of a minimal set of devices required to
launch active boot option. Has no effect for BBS boot options.
Setup Prompt Timeout
Number of seconds to wait for setup activation key.
65535(0xFFFF) means indefinite waiting.
Bootup NumLock State
Select the keyboard NumLock state.
GateA20 Active
UPON REQUEST
– GA20 can be disabled using BIOS services.
ALWAYS
– do not allow disabling GA20; this option is useful when any RT
code is executed above 1MB.
Option ROM Messages
Set display mode for Option ROM. Options are Force BIOS and Keep Current.
Interrupt 19 Canture
Enable: Allows Option ROMs to trap Int 19.