IBASE MI953 - Manual (Page 7)

INTRODUCTION
MI953 User’s Manual 3
MI953 Specifications
CPU Supported Intel® Arrandale DC mobile processor
CPU Voltage 0.700V ~ 1.5V (IMVP-6.5)
System Speed Up to 3.0GHz or above
CPU FSB 1066MHz FSB
Cache Up to 4MB shared L3 Cache
Green /APM APM1.2
CPU Socket rPGA Socket 989
Chipset Intel Ibex Peak-M (PCH) Chipset
PCH: 25mm x 27mm, 1071-pin FCBGA
BIOS AMI BIOS, supports ACPI function
Memory DDR3 800/1066 SoDIMM x2 (w/o ECC function), Max. 8GB
VGA Arrandale DC mobile processor integrated graphics
Supports CRT
Supports DVI single or Dual
LVDS LCD Panel Arrandale DC mobile processor built-in, supports 24-bit, single or
dual channel LVDS
LAN 1. PCH 10/100/gigabit MAC + PHY
• Intel 82577LM 10/100/1000
2. Intell 82574L PCI-e Gigabit LAN controller x1 (MI953F)
USB PCH built-in USB 2.0 host controller, support 10 ports
Serial ATA Ports PCH built-in SATA controller, supports 4 ports
IAMT6.0 PCH built-in Intel Active Management Technology VER 6.0 with HW
KVM (MI953RF only)
Audio PCH built-in High Definition audio controller:ALC888 w/ 7.1 channels
LPC I/O F81865F: COM1, COM2 (RS232/RS422/RS485), COM3 and COM4
Hardware monitor (3 thermal, 4 voltage monitor inputs, 2 fan
headers)
Digital IO 4 in & 4 out
Keyboard/Mouse Supports PS/2 keyboard/mouse connector
Expansion Slots PCI slot x1, PIC-E (x1) slot x1 and Mini PCIE socket x1
Edge Connector PS/2 connector x1 for keyboard/mouse and dual USB stack
connector
Gigabit LAN RJ-45 + dual USB stack connector x2
DVI-D and DVI-I stack connector x1
DB9 x1 for COM 1; DB15 x1 for VGA
RCA Jack 3x1 for Audio (Front-Out, Line-In, Mic)
Onboard Header/
Connector 10-pin headerx1 for Digital I/O; 10-pin header x1 for COM2
20-pin header x1 for COM3, COM4
10-pin header x 2 for USB 7,8; 9,10
DF13 connector x2 for LVDS;
10-pin header x1 for audio Line-Out & Mic
4-pin header x1 for CD in, SPDIF-out connector x1
SATA connector x4 for SATA ports
Watchdog Timer Yes (256 segments, 0, 1, 2…255 sec/min)
System Voltage +5V, +3.3V, +12V, -12V, 5VSB (2A)
Others Modem Wakeup, LAN Wakeup
Board Size 170mm x 170mm (Mini ITX)