IBASE MB950 - Manual (Page 43)

BIOS SETUP
MB950 User’s Manual 39
Advanced Chipset Settings
This setting configures the north bridge, south bridge and the ME
subsystem. WARNING! Setting the wrong values may cause the system
to malfunction. -
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security
Chipset
Exit
Advanced Chipset Settings
Configure North Bridge
features.
<- Select Screen
↑↓ Select Item
+- Change Field
Tab
Select Field
F1 General Help
F10 Save and Exit
ESC Exit
WARNING: Setting wrong values in below sections
may cause system to malfunction.
► North Bridge Configuration
► South Bridge Configuration
► ME Subsystem Configuration
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security Chipset Exit
North Bridge Chipset Configuration
Disabled
15MB-16MB
<- Select Screen
↑↓ Select Item
+- Change Field
Tab
Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Memory Remap Feature [Enabled]
DRAM Frequency [Auto]
Configure DRAM Timing by SPD [Auto]
Memory Hole [Disabled]
Initiate Graphic Adapter [PEG/PCI]
IGD Graphics Mode Select [Enabled, 32MB]
NB PCIE Configuration
PEG Port [Auto]
PEG Force GEN1 [Disabled]
► Video Function Configuration
Memory Remap Feature
This allows remapping of overlaped PCI memory above the total physical
memory.
DRAM Frequency
The options are Auto, 1067 MHz and 1333 MHz.
Configure DRAM Timing by SPD
The options are Auto and Manual.