IBASE IB704 - Manual (Page 35)

BIOS SETUP
IB704 User’s Manual 31
PNP/PCI Configurations
This option configures the PCI bus system. All PCI bus systems on the
system use INT#, thus all installed PCI cards must be set to this value.
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
PNP OS Installed No ITEM HELP
Init Display First PCI Slot Menu Level
Default is Disabled.
Select Enabled to reset
Extended
System
Configuration Data
ESCD) when you exit
Setup if you have
installed a new add-on
and
the system
reconfiguration has
caused such a serious
conflict that the OS
cannot boot.
Reset Configuration Data Disabled
Resources Controlled By Auto (ESCD)
IRQ Resources Press Enter
DMA Resources Press Enter
Memory Resources Press Enter
PCI/VGA Palette Snoop Disabled
PNP OS Installed
If your OS supports Plug & Play (PnP), select Yes so that it can take over
the management of device resources. If you are using a non-PnP-aware
OS or not all of the operating systems you are using support PnP, select
No to let the BIOS handle it instead.
Init Display First
This field refers to the primary video or primary video adapter. The
default setting is PCI Slot.
Reset Configuration Data
This field allows you to determine whether to reset the configuration data
or not. The default value is Disabled.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices
automatically with the use of a use a PnP OS system such as Windows 95.
PCI/VGA Palette Snoop
Some non-standard VGA display cards may not show colors properly.
This field allows you to set whether or not MPEG ISA/VESA VGA cards
can work with PCI/VGA. When this field is enabled, a PCI/VGA can
work with an MPEG ISA/VESA VGA card. When this field is disabled, a
PCI/VGA cannot work with an MPEG ISA/VESA card.