IBASE SI-28 - Manual (Page 21)

21
set the current time.
The time format is:
Hour: 00 to 23
Minute: 00 to 59
Second: 00 to 59
IDE Channel Master/Slave
The onboard PCI IDE connector provides Primary and Secondary channels for
connecting up to two IDE hard disks or other IDE devices.
Press <Enter> to configure the hard disk. The selections include Auto, Manual, and
None. Select ‘Manual’ to define the drive information manually. You will be asked to
enter the following items.
CYLS: Number of cylinders
HEAD: Number of read/write heads
PRECOMP: Write precompensation
LANDING ZONE: Landing zone
SECTOR: Number of sectors
Remarks: The main board support two serial ATA ports and are represented in this
setting as IDE Channel 0.
Halt On
This field determines whether or not the system will halt if an error is detected
during power up.
No errors:
The system boot will not be halted for any error that may be detected.
All errors:
Whenever the BIOS detect a non-fatal error, the system will stop and you will be
prompted.
All, But Keyboard:
The system boot will not be halted for a keyboard error; it will stop for all other