IBASE SI-28 - Manual (Page 32)

32
PNP/PCI Configurations
This option configures the PCI bus system. All PCI bus systems on the system use
INT#, thus all installed PCI cards must be set to this value.
Reset Configuration Data
This field allows you to determine whether to reset the configuration data or not.
The default value is Disabled.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices with the use of
a PnP operating system such as Windows 95.
PCI/VGA Palette Snoop
Some non-standard VGA display cards may not show colors properly. This field
allows you to set whether or not MPEG ISA/VESA VGA cards can work with
PCI/VGA. When this field is enabled, a PCI/VGA can work with an MPEG
ISA/VESA VGA card. When this field is disabled, a PCI/VGA cannot work with an
MPEG ISA/VESA card.
Assign IRQ for VGA/USB
The default value is Enabled
PCI Latency
PCI latency refers to the number of cycles that any device can hold an IRQ before it
is disconnected.
Maximum Payload Size
The default setting of the PCI Express Maximum Payload Size is 4096.