IBASE SI-62 - Manual (Page 14)

12 SI-62 User Manual
2 HARDWARE INSTALLATION
2.1 Installing the CPU
The IB902A board supports rPGA988B socket for Intel® Ivy Bridge Dual Core
mobile processors. The processor socket comes with a screw to secure the processor.
As shown in the picture below, loosen the screw first before inserting the processor.
Place the processor into the socket by making sure the notch on the corner of the
CPU corresponds with the notch on the inside of the socket. Once the processor has
slide into the socket, fasten the screw. Refer to the figures below.
NOTE: Ensure that the CPU heat sink and the CPU top surface are in total contact to
avoid CPU overheating problem that would cause your system to hang or be
unstable.