IBASE SI-64 - Manual (Page 49)

Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
47 IBASE Technology Inc.
Graphics Configuration
Aptio Setup Utility
Main Advanced Chipset Boot Security Save & Exit
Graphics Configuration
→ ← Select Screen
↑↓
Select Item
Enter: Select
+- Change Field
F1:
General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit
IGFX VBIOS Version 2132
IGfx Frequency 350 MHz
Primary Display Auto
Internal Graphics Auto
GTT Size 2MB
Aperture Size 256MB
DVMT Pre-Allocated 64M
DVMT Total Gfx Mode Disabled
► LCD Control
Primary Display
Select which of IGFX/PEG/PCI graphics device should be primary display or select SG for
switchable Gfx.
Internal Graphics
Keep IGD enabled based on the setup options.
DVMT Pre-Allocated
Select DVMT 5.0 Pre-Allocated (Fixed) graphics memory size used by the internal graphics
device.
DVMT Total Gfx Mem
Select DVMT 5.0 total graphics memory size used by the internal graphics device.
Gfx Low Power Mode
This option is applicable for SFF only.
Primary IGFX Boot Display (LCD Control)
Select the Video Device that will be activated during POST. This has no effect if external
graphics present. Secondary booty display selection will appear based on your selection.
VGA modes will be supported only on primary display.