IBASE SI-64 - Manual (Page 75)

Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
73 IBASE Technology Inc.
Appendix
A. Mounting SI-64 to the Wall
You can install SI-64 on plastic (LCD monitor), wood, drywall surface over studs, or
a solid concrete or metal plane directly. Ensure the installer uses at least four M3
length 6mm screws to secure the system on wall. Four M3 length 6mm screws
are recommended to secure the system on wall.
Fasteners are not included with the unit, and must be supplied by the installer. The
types of fasteners required are dependent on the type of wall construction. Choose
fasteners that are rated either ”Medium Duty“ or ”Heavy Duty.“ To assure proper
fastener selection and installation, follow the fastener manufacturer’s
recommendations.
Wall Mounting Requirements
Note: Before mounting the system on wall, ensure that you are following all
applicable building and electric codes.
When mounting, ensure that you have enough room for power and signal cable
routing. And have good ventilation for power adapter. The method of mounting must
be able to support weight of the SI-38N plus the suspend weight of all the cables to
be attached to the system. Use the following methods for mounting your system: