ikan D7w-1 User Manual

Page 5

Advertising
background image

www.ikancorp.com

713-272-8822

D7w

User programmable function keys. For quick
access, the user may program the F1, F2, F3 and
F4 buttons to enable frequently accessed

-

tion menu.

Allows to see the image in monochrome or only the red, blue, or green
channels.

Enabling this allows you to toggle between 3 different scopes: Waveform,
Vectorscope, and RGB Parade.

The LCD panel in this display has a native display of 1280 x 800 pixels.

may be time when it is desired to view the incoming signal without scaling.
Enabling Pixel to Pixel mode turns off the scaling and displays a 1280 x
800 pixel window of the original image. Each pixel of the panel displays
one pixel of the original image. The user may use the scroll wheel on top of
the monitor to move the window left, right. Push the scroll wheel again to
toggle up and down.

The D7w is equipped with Monochrome Peaking features which highlight
the desired focus area in a bright, red outline. The operator adjusts the
focus control until the red indicator outlines on the desired area are razor
sharp, indicating optimal focus. For the best results, be sure the subject is
properly exposed.

The False Color feature utilizes a full spectrum of assigned color indicators,

indicating optimal exposure. See included chart for color assignments.

As an additional tool associated with the D7w’s False Color feature, ikan’s
exclusive Adjustable Under Exposure and Over Exposed Waning feature
gives the operator full control of the D7w False Color brightness values. By
setting the preferred IRE exposure limits, the operator is warned when the
image exposure is exceeding or falling under the preset IRE limit, providing
customizable, full image exposure control.

The D5 offers adjustable upper Clip Guide levels to accurately display
overexposed images in any shooting condition. The operator simply
assigns the upper IRE to their preference and any exposure over the set

(Same As
F2, F3 & F4 Key)

CONFIGURATION OF SETTING MENUS


FUNCTION SETUP

Luma Under Warn

Luma Over Warn

F1 Key

Peaking

False Color

Clip Guide

Underscan

DSLR Scaling

Waveform

Check Field

Pixel

Window 1

Window 2

HV Delay

Guides

Crosshair

EXIT

7" 3G-SDI LCD Monitor w/ IPS Panel (Waveform) QUICKSTART GUIDE

Advertising
This manual is related to the following products: