Assembly instruction, Pt4000, 20” teleprompter your tripod – ikan PT4000 User Manual
Page 5
Install 4 x T-plates (Part C) and 8 x Long Phillips Head screws (Part G) onto the Metal frame with Prompter Glass (Part L).
Then, slide the Prompter Glass assembly onto the completed Teleprompter frame. Refer to the diagram below.
3903 Stoney Brook Dr. Houston TX 77063 | +1.713.272.8822 | www.ikancorp.com | [email protected] | © 2009 ikan Corporation. All right reserved.
ASSEMBLY INSTRUCTION
7
8
PT4000
20” TELEPROMPTER
your
tripod
> Install 4 x Part-C on Part-L and
secure with 8 x Part-G (Place the
Part-C on the inner sides)
Part-Q
Part-C
Part-G
Part-L
ikancorp.com
Slide the Monitor with mounting bracket onto the 15” T-slot (Part O), aligning the T-slot Nuts with the T-slots of Part O.
Refer to the diagram below.
ikancorp.com
Side View
Part-O
Part-M
Part-P
4 of 10