ilve HVI90TC - Manual (Page 18)

18
Ventilation
The cooling system is fully automatic. The cooling fan starts with a low speed when the
calories brought out by the electronic system reach a certain level. The ventilation starts his
high speed when the hob is intensively used. The cooling fan reduces his speed and stops
automatically when the electronic circuit is cooled enough.
STARTING-UP AND APPLIANCE MANAGEMENT
Before the first use
Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the glass surface.
Induction principle
An induction coil is located under each heating zone. When it is engaged, it produces a
variable electromagnetic field which produces inductive currents in the ferromagnetic bottom
plate of the pan. The result is a heating-up of the pan located on the heating zone.
Of course the pan has to be adapted:

All ferromagnetics pans are recommended (please verify it thanks a little magnet): cast
iron and steel pans, enamelled pans, stainless-steel pans with ferromagnetic
bottoms…

Are excluded : cupper, pure stainless-steel, aluminium, glass, wood, ceramic,
stoneware,…
The induction heating zone adapts automatically the size of the pan. With a too small
diameter the pans doesn’t work. This diameter is varying in function of the heating zone
diameter.If the pan is not adapted to the induction hob the display will show [ U ].
Starting-up

Start-up/ switch off the hob
Action Control panel Display
To start: touch the key [ 0/I ] [ 0 ]
To stop: touch the key [ 0/I ] nothing or [ H ]

Start-up/ switch off a heating zone
Action Control panel Display
Increase power touch key [ + ] [ 4 ] to [ 9 ]
Decrease power touch key [ - ] [ 9 ] to [ 1 ]
Stop touch simultaneous [ + ] and [ - ] [ 0 ] or [ H ]
Pan detection
The pan detection ensures a perfect safety.
The induction doesn’t work :

If there is no pan on the heating zone or if this pan is not adapted to the induction. In
this case it is impossible to increase the power and the display shows [ U ]. This
symbol disappears when a pan is put on the heating zone.

If the pan is removed from the heating zone the operation is stopped. The display
shows [ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone.
The cooking continues with the power level setted before.