ilve HVI90TC - Manual (Page 20)

20
 To stop the “Egg Timer”
Action Control panel Display
To select the “Egg Timer” press once on timer key
[ - ] and [ + ] simultaneously
the time displays
To stop the “Egg Timer” press on timer key [ - ] displays [01]
press second time on
timer key [ - ]
displays [00]

Setting and modification of the cooking time of a heating zone
Action Control panel Display
To select a heating zone press on key [ + ] [4]
To select the power level press on key [ + ] or [ - ] [1] to [9]
To select the « Timer » press on timer key [ - ] and [ + ]
simultaneously until the
desired heating zone.
timer control light
from the desired
heating zone is on
Decrease the time press on timer key [ - ] [30] wents to
29,28,27,
Increase the time
press on timer key [ + ] the time
increases…
The time is configured and the cooking starts until the time reaches [00].

To stop the cooking time of a heating zone
Action Control panel Display
To stop the « Timer » press on timer key [ + ] and [ - ]
Simultaneously until the desired
heating zone
The time displays
press on timer key [ - ] displays [01.]
press second time on timer key [ - ] displays [00.]
If several timers are activated repeat the process.

Automatic stop at the end of the cooking time
As soon as the selected cooking time is finished the timer displays blinking [00] and a sound
rings and the heating zone stops.
To stop the sound and the blinking it is enough to press the timer key [ - ] or [ + ].
Function “keep warm”
This function of maintenance to the heat makes it possible to reach and maintain
automatically a temperature of 70°C.
This will avoid liquids over spillage and the food to attach at the bottom of the pan.
Start-up:
You must initially engage the cooking surface, then the zone of heating:

To
engage, to start the function “ keep warm “
Action Control panel Display
To engage press “Keep Warm” key keep warm control light is blinking
To select the desired
heating zone press key [ + ] or [ - ] [ U ]
To stop press key [ + ] or [ - ] [ 0 ] to [ 9 ]
This function can be started independently on all the heating zone.
When the pan leaves the zone of cooking the "keep warm" function remains active during
approximately 10 minutes.
The maximum duration of maintenance to the heat is 2 hours.