Inova Labs XYC100B-P4L Quick Start - Manual (Page 5)

OPERATING YOUR POC
5
1. Briefly press and release the Power Button.
The display screen and green Power Indicator
will illuminate.
2. Press the + or – button to select to the pulse setting
prescribed by your doctor.
3. Place the nasal cannula onto the nasal cannula
fitting on the device and the cannula prongs in your
nose and breathe normally. The device detects
when you take a breath and delivers oxygen in
PULSE-WAVE™ doses. The PULSE-WAVE™ symbol
___ will flash on and off as you breathe.
4. To turn off, press and hold the Power Button until
you hear a beep.
NOTE: The device utilizes PULSE-WAVE™ Delivery
which delivers oxygen congruent with your inhalation
rate. Because this type of delivery is very gentle, you
may not feel the pulse of oxygen. To verify that oxygen
is being delivered, reference the symbol next to
your selected Pulse Setting on the display. This symbol
will flash every time a breath is detected and a bolus
of oxygen is delivered.
NOTE: If you remove the nasal cannula while the
device is on or breathe through your mouth for an
extended period of time, you may trigger the “No
Breath” alarm. Reconnect the cannula or breathe
through your nose to turn the alarm off.