Jetway Computer NF35 v.4.0 - Manual (Page 29)

24
► Serial Port 3 Configuration
Press [Enter] and set parameter of the following sub-items for serial port3:
Serial Port
Use this item to enable or disable serial port (COM).
Change Settings
Use this item to select an optimal setting for super IO device.
Device Mode
The optional settings are: [Standard Serial Port Function Mode]; [IR Mode, Pulse
1.6 us, Full Duplex]; [IR Mode, Pulse 1.6 us, Half Duplex]; [IR Mode, Pulse 3/16
Bit Time, Full Duplex, [IR Mode, Pulse 3/16 Bit Time, Half Duplex].
► Serial Port 4 Configuration
Press [Enter] and set parameter of the following sub-items for serial port4:
Serial Port
Use this item to enable or disable serial port (COM).
Change Settings
Use this item to select an optimal setting for super IO device.
► JM36X ATA Controller Configuration
Press [Enter] to enter and make settings for PATA Primary Master; PATA Primary
Slave; ATA Controller.