Denon DN-HD2500 - Manual (Page 10)

5
ENGLISH
@8 TAP, LOCK, AUTO/INPUT BPM
button
• TAP:
When you push this button repeatedly, the Auto
mode turns off and starts measuring your Beats
Per Minute (BPM) by tapping.
• LOCK:
When this button is pressed once while the Auto
BPM counter is operating, the data measured by
the Auto BPM counter is locked.
• AUTO:
When pushing the TAP button for 1 second,
activates AUTO BPM mode.
The measured BPM is displayed in the character
section of the display.
• INPUT BPM :
When the TAP button is pressed and held in for
more than 2 seconds, the BPM input mode is set
and the BPM value can be input directly with the
PARAMETERS knob. When the TAP button is
pressed again, the BPM input mode is turned off.
NOTE:
• If you select a new file, AUTO BPM mode turns on
automatically.
• BPM data can be saved to the MEMO function.
@9 FILTER button
• One of three filters (LOW PASS, MID PASS and
HIGH PASS) can be selected.
#0 FLANGER button
• The depth and delay time can be selected.
#1 ECHO/LOOP button
• The ECHO and LOOP functions can be selected.
The feedback level and delay time can be
selected. Looping for the delay time (ECHO
LOOP) is possible by setting the feedback level to
“MAX”.
#2 EXIT/RELOOP button
• Use this to exit or return back again to Seamless
loop playback. You can add variety to looping with
this function.
#3 B button
• Use this to set the B point for to create a
Seamless Loop after the A point has been set.
#4 A/B TRIM buttons
• When the button is pressed during playback, the
*A/B TRIM MODE is selected. *Only when a
seamless LOOP is set.
#5 A1, A2 button
• Using this button you can create starting point for
Hot Start, Seamless Loop and Stutter.
#6 FLIP/CLR button
• FLIP:
Use this to select operating mode of A1 and A2
buttons, from Hot Start mode and Stutter mode.
The display will indicate “H/S” or “STR”.
• A1, A2 CLR:
If the A1 or A2 button is pushed while pushing the
FLIP button, you can clear the selected A point.
By holding down just the FLIP button for more
than 1 sec, you can clear A1 and A2 points all at
once.
#7 FAST SEARCH (7) QUICK JUMP
button
FAST SEARCH (6), QUICK JUMP
button
• QUICK JUMP:
When one of these buttons is tapped shortly, the
playback position jumps approximately 10
seconds in the reverse (6) or forward (7)
direction. The jump time can be changed in the
preset mode.
• FAST SEARCH:
When one of these buttons is pressed and held in,
the disc is fast-searched in the reverse (6) or
forward (7) direction.
ENGLISH