Kawai CA97 - Manual (Page 112)

112
Set
tings
1
MIDI Channel
The MIDI Channel setting allows the transmit/receive channel to be specified. The selected channel will function as
both the transmit and receive channel (separate transmit/receive channels cannot be specified).
1. Selecting the MIDI Channel setting
After entering the MIDI Settings menu (page 111):
Press the d or c buttons to select the MIDI Channel setting.
2. Changing the MIDI Channel value
Press the e or f buttons to increase or decrease the value of
the MIDI Channel setting.
* The MIDI Channel value can be adjusted within the range of 1~16.
* To reset the MIDI Channel setting to the default value, press the
e and f buttons simultaneously.
* Any changes made to the MIDI Channel setting will remain until the
power is turned off.
* Preferred MIDI Channel settings can be stored to a Registration
memory for convenient recall. Please refer to page 77 for more
information.
3. Exiting the MIDI Channel setting
Press the FUNCTION button (BACK) to exit the MIDI Channel
setting and return to the Function Menus screen.
„Omni mode
When the CA97/CA67 digital piano is turned on, the instrument is automatically set to ‘omni mode on’, allowing MIDI information to
be received on all MIDI channels (1-16). When the MIDI Channel setting is used to specify a transmit/receive channel, the instrument
will be set to ‘omni mode off’.
„Multi-timbral mode and Split/Dual modes
Using Split mode with Multi-timbral mode enabled
Notes played in the lower section of the keyboard will be
transmitted on the channel that is 1 channel higher than the
specified channel. For example, if the MIDI channel is set to
3, notes played in the lower section of the keyboard will be
transmitted on channel 4.
Using Dual mode with Multi-timbral mode enabled
Notes played will be transmitted on two channels: the
specified channel and the channel that is 1 channel higher.
For example, if the MIDI channel is set to 3, notes played on
the keyboard will be transmitted on channels 3 and 4.
* If the specified MIDI channel is 16, the lower section / layered part will be transmitted on channel 1.
MIDI Settings