Kawai CA97 - Manual (Page 33)

33
P
la
y
ing
the
P
iano
2
Storing a Registration memory
1. Entering Registration Store mode
While the normal playing mode screen is shown in the LCD display:
Press and hold the REGISTRATION button.
The registration memory (SOUND) buttons will start to flash.
2. Selecting the Registration memory
Press the or FUNCTION buttons to select the registration
memory bank ‘A’ and ‘B’, then press a registration memory
(SOUND) button.
The Registration name screen will be shown in the LCD display.
3. Naming the Registration memory
Enter a name for the registration memory by pressing the
d or c buttons to cycle through the alphanumeric characters,
and the
e or f buttons to move the cursor.
4. Storing the Registration to memory
Press the FUNCTION button (STORE) to confirm the store
operation, or the FUNCTION button (EXIT) to cancel.
Upon storing, a beep will sound and a confirmation message
will briefly be shown in the LCD display.
The current instrument setup will be stored to the selected
registration memory with the specified name.
Example: To store the current instrument setup
to memory A-2, press the
FUNCTION button,
then press the PIANO 2 (memory 2) button.
hold
dc buttons:
Select character.
ef buttons:
Move selection cursor.
STORE EXIT
* The stored registration will remain in memory after the instrument
is turned off, or if the instrument’s power cable is disconnected from
the wall outlet.