10 . sy ste m but ton – Kawai MP6 User Manual
Page 65
65
1
0
. SY
STE
M But
ton
10.2.22 LED Brightness
This adjusts the brightness of the LEDs. You can choose from High or Low.
The Low setting is designed for dark stages, while the High setting is good for
bright ambience.
10.2.23 Out Mode
Sometimes it is convenient to have two mono outputs instead of a stereo
output.
In this case one mono output can be used for your own monitor system and the
other goes to the mixing console.
Stereo
The signal on the Line-Outs is normal stereo.
2xMono
The signal on the Line-Outs is mono on both jacks
Note:
* To avoid unexpected sound issues some stereo effects like AutoPan will be turned off
when 2xMono is selected.
10.2.24 Foot Switch Mode
This parameter sets the mode of FootSW's function.
Normal:
The type of controller assigned to the footswitch is a common SETUP
parameter "FootSW CC#". (see page 46)
Setup+:
The footswitch increments the selected SETUP by 1.
Plybck:
The footwitch starts/stop selected song (audio file etc.) playback.
Metro.:
The footswitch starts/stop selected metronome/rhythm pattern.
Note:
* When the value is ‘Setup+’, the FootSW CC# page will not be displayed.
SYSTEM
LED Bright.=High
SYSTEM
Out Mode =Stereo
SYSTEM
FootSW
=Normal