Kemppi FreshAir Flow Control unit - Manual (Page 13)

EN
13
© Kemppi Oy / 1309
6.5 Changing the battery
Remove the battery:
1. Take the blower unit in both hands with the rear side of battery facing
you.
2. Open the battery latch with your thumb. The latch is positioned in the
middle of the battery.
3. Push the battery off the unit using your thumbs.
Mount the new battery:
1. Hold the blower unit in the same position as before.
2. Put the battery on the guide rail and push it back onto the unit until
the latch locks it in the correct positon.
13
© Kemppi Oy / 1309