Alcatel Pixi 4 4034 D - Manual (Page 6)

8 9
In non-European Union jurisdictions:
Items of equipment with this symbol are not to be thrown into ordinary bins if
your jurisdiction or your region has suitable recycling and collection facilities;
instead they are to be taken to collection points for them to be recycled.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
• CHARGERS:
Mains powered chargers will operate within the temperature range of: 0°C to
40°C.
The chargers designed for your mobile phone meet with the standard for safety
of information technology equipment and office equipment use. They are also
compliant to the ecodesign directive 2009/125/EC. Due to different applicable
electrical specifications, a charger you purchased in one jurisdiction may not
work in another jurisdiction. They should be used for this purpose only.
• RADIO WAVES:
Proof of compliance with international standards (ICNIRP) or with European
Directive 1999/5/EC (R&TTE) is required of all mobile phone models before
they can be put on the market. The protection of the health and safety for the
user and any other person is an essential requirement of these standards or
this directive.
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO
RADIO WAVES
Your mobile device is a radio transmitter and receiver. It is designed
not to exceed the limits for exposure to radio waves (radio frequency
electromagnetic fields) recommended by international guidelines. The
guidelines were developed by an independent scientific organization (ICNIRP)
and include a substantial safety margin designed to assure the safety of all
persons, regardless of age and health.
The radio wave exposure guidelines use a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2 W/kg.
Tests for SAR are conducted using standard operating positions with the
device transmitting at its highest certified power level in all tested frequency
bands. The highest SAR values under the ICNIRP guidelines for this device
model are:
4034X/4034D/4034F:
Maximum SAR for this model and conditions under which it was
recorded.
Head SAR GSM 900+Wi-Fi 0.917 W/kg
Body-worn SAR GSM 900+Wi-Fi 0.793 W/kg
5045X/5045D:
Maximum SAR for this model and conditions under which it was
recorded.
Head SAR LTE Band 7+Wi-Fi 0.466 W/kg
Body-worn SAR UMTS 2100+Wi-Fi 0.669 W/kg
5010X:
Maximum SAR for this model and conditions under which it was
recorded.
Head SAR GSM 900+Wi-Fi 0.486 W/kg
Body-worn SAR GSM 900+Wi-Fi 0.662 W/kg
5010D/5010U:
Maximum SAR for this model and conditions under which it was
recorded.
Head SAR GSM 900+Wi-Fi 0.486 W/kg
Body-worn SAR GSM 900+Wi-Fi 0.755 W/kg
During use, the actual SAR values for this device are usually well below the
values stated above. This is because, for purposes of system efficiency and
to minimize interference on the network, the operating power of your mobile
device is automatically decreased when full power is not needed for the call.
The lower the power output of the device, the lower its SAR value.
Body-worn SAR testing has been carried out at a separation distance of
10 mm. To meet RF exposure guidelines during body-worn operation, the
device should be positioned at least this distance away from the body.