Denon AVR-3310CI - Manual (Page 7)


ENGLISH
Connections
Set
tin
g
s
Pla
ybac
k
Inf
or
mation
Specifications
Get
ting Star
te
d
Una
vailable F
unctions
Af
ter Upgr
ading
When Using the Front Wide Speakers
G Example qH G Example wH
( : Measuring positions)
FWL
FL SW C FR
FWR
FL SW C FR
SR SL
* M
FWL
FL SW C FR
FWR
FL SW C FR
SR SL
* M
FL : Front speaker (L) C : Center speaker
FR : Front speaker (R) SW : Subwoofer
FHL : Front height speaker (L) SL : Surround speaker (L)
FHR : Front height speaker (R) SR : Surround speaker (R)
FWL : Front wide speaker (L) SBL : Surround back speaker (L)
FWR : Front wide speaker (R) SBR : Surround back speaker (R)
n
The acoustic characteristics of the connected speakers and
listening room are measured and the optimum settings are made
automatically.
Audyssey Auto Setup Flow n
a Connect the Included Setup Microphone
d Perform Audyssey Auto Setup
s Audyssey Auto Setup Preparations
Change the Amplifier Assignment
(Amp Assign) (vpage 7)
When upgrading, contents of “Amp Assign” are modified.
Set the channel to be measured (Channel Select)
n
n
Check the Measuring Results and Equalizer
Type after Audyssey Auto Setup
(Parameter Check)
Make the Optimal Speaker Settings, and Correct the Room Acoustics
(Audyssey™ Auto Setup)
Audyssey MultEQ® automatically measures the acoustical problems
in the listening environment to create the best audio experience for
your home theater.
• When Audyssey™ Auto Setup procedure is performed, the MultEQ®,
Dynamic EQ® and Dynamic Volume™ functions (vpage 13 ~15)
are enabled.
• Use the included setup microphone (DM-A409) to perform Audyssey
Auto Setup procedure.
• Measurements are performed by placing the calibrated microphone
successively at multiple positions throughout the listening area as
shown in GExample qH. For best results, it is strongly recommended
to measure 6 positions so that the measurements have the proper
spatial weighting.
Even if the listening environment is small as shown in GExample wH,
measuring at multiple points throughout the listening environment
results in more effective correction.
When using Front Height Speakers
G Example qH G Example wH
FHL FL SW C FR FHR
SL SR
* M
FHL FL SW C FR FHR
SL SR
* M
( : Measuring positions)
n
Important Information
About the main listening position (*M)
The main listening position refers to the most central position where
one would normally sit within the listening environment.
MultEQ® uses the measurements from this position to calculate
speaker distance, level, polarity, and the optimum crossover value
for the subwoofer.
See overleaf
Set
tin
g
s