Fig. 12 fitting for ducting, Fitting for recirculation, Mounting the chimney – Kleenmaid KEY60 User Manual
Page 10
Advertising
10
Lower
screws
Recirculation
spigot
Supply cord
Tube
Chimney
Air outlet
Chimney holder
Chimney
fixing
points
Fig. 12
Fitting for ducting
Connect a tube between the rangehood air outlet and the wall or roof exhaust channel.
Fitting for recirculation
Mount the recirculation spigot with the 4 screws supplied.
Mounting the chimney
Connect the supply cord to the mains.
Place the chimney and fix it to the top chimney holder with the two screws supplied.
Lower the bottom part of the chimney to the top of the rangehood.
Advertising