Kleenmaid KEY60 - Manual (Page 8)

8
R
T
Y
Y
Y
Y
R
T
!
Template
Rawl
plugs+hooks
Adjustment
screws
Wall unit mounting
• Position the template on the wall, mark the position, and drill the holes (Y).
• Mount the two rawl plugs with the hooks.
• Hang the rangehood on the hooks and level it with the adjustment screws.
• Remove the grease filters and mark for the 4 screws (T-R).
• Remove the rangehood and drill the holes (4 x Ø 8 mm).
• Insert the rawl plugs and fit two screws on upper holes, do not tighten completely, they will serve as
additional hanging points.
Installation
Fig. 7
Fig. 8