Fitting the electronic control box, Fig. 9 fig. 10, Fig. 11 – Kleenmaid KEY60 User Manual
Page 9
Advertising
9
Mount the chimney holder close to the ceiling with the rawl plugs and the screws.
Warning! Be careful that it is centered over the rangehood and horizontally aligned.
Hang the rangehood on the wall again.
Secure it with the 2 lower screws (see Fig. 12).
Fitting the electronic control box
Fit the electronic box S2 in its housing and check that all
connections are well performed.
Fix definitively with one screw.
Connect the ribbon cable S3 from the hood to the male-connector
(use the wider one).
Hooks
Additional
hanging points
Centre line
Chimney
holder
Fig. 9
Fig. 10
S2
S3
Fig. 11
Electronic
control box
Advertising