Motorola DP 2600 - Manual (Page 37)

Making and R
eceiving Calls
English
27
Your radio returns to the Phone Call screen. Repeat Step 3
or wait for the telephone user to end the call.
If Phone Call capability is not enabled in your radio, the display
shows Unavailable and your radio mutes the call. Your radio
returns to the previous screen when the call ends.
Phone Call as All Call
Procedure:
When you receive a Phone Call as an All Call:
1 The Phone Call icon appears in the top right corner. The
display shows All Call and Phone Call.
2 Press the PTT button to talk and release to listen.
3 Press
d
to end the call.
The display shows Ending Phone Call.
4 If successful:
A tone sounds and the display shows All Call and
Call Ended.
OR
If unsuccessful:
Your radio returns to the Phone Call screen. Repeat Step 3
or wait for the telephone user to end the call.
If Phone Call capability is not enabled in your radio, the display
shows Unavailable and your radio mutes the call. Your radio
returns to the previous screen when the call ends.
NOTE: When you receive a Phone Call as an All Call, you can
respond to the call or end the call, only if an All Call
type is assigned to the channel.
Making a Radio Call
You can select a channel, subscriber ID, or group by using:
• The Channel Selector Knob.
• A programmed One Touch Access button (see Making a
Phone Call with the One Touch Access Button on
page 31).
• A programmable button – This method is for Phone Calls only
(see Making a Phone Call with the Programmable Phone
Button on page 32).
• The Contacts list. (see Contacts Settings on page 42)
NOTE: Your radio must have the Privacy feature enabled on
the channel to send a privacy-enabled transmission.
Only target radios with the same Privacy Key OR the
same Key Value and Key ID as your radio will be able
to unscramble the transmission.
See Privacy on page 63 for more information.
The One Touch Access feature allows you to make a
Group or Private Call to a predefined ID easily. This

LKP_EMEA.book Page 27 Wednesday, July 18, 2012 10:36 PM