Dorel Juvenile Group 4358-3832A - Manual (Page 28)

Belt-Positioning Booster
Installation
WARNING: !
Loose LATCH hooks can result in serious
injury or death.
Do not use LATCH when
using the belt-positioning
booster.
You MUST fasten LATCH
belt hooks on the sides of
the child restraint as
shown.
1
Place booster seat against
the back of the vehicle
seat.Tuck the top
anchorage hook under the
child restraint. Have child
sit in seat with his or her
back and bottom fully in
the seat.
2
Place lap belt across
child’s thighs. Lock buckle.
NOTE: Make sure the
lap and shoulder belt are
placed under armrest as
shown.
WARNING !
Do not use this booster seat
with the backrest if the top of
your child’s head is above the
top of the booster seat’s
headrest. Convert to the
backless belt-positioning booster.
Use only the vehicle’s lap and shoulder
belt system when restraining the child in
this booster seat.
Do not use this booster with
the backrest if the bottom
edge of headrest is lower
than the top of the child’s
shoulders. Convert to the
backless belt-positioning
booster.
Failure to follow these warnings can result
in serious injury or death to your child.
Be
lt-P
osit
ion
ing
B
oo
ste
r U
se
:4
0-1
00
lb
s.
(18
.1-
45
.4 k
g),
43
-4
8”
(11
0.1
-1
21
.9 c
m
),O
ve
r 1
y
ea
r o
f a
ge
.
continued on next page. 53 52
4358-3832A US Prospect 2/23/06 10:18 AM Page 55