Dorel Juvenile Group 4358-3832A - Manual (Page 35)

6
Pull pad off around
cup/snack holder and
remove pad.
7
If your model has armrest
pads, undo the elastic
straps from tops of
armrests and pull armrest
pads off.
Replace seat pad by reversing order;
Seat Base Pad: Starting from front of the child restraint,
slip pad on seat base. Attach the elastic straps from
middle of pad to back of seat base.
Backrest Pad: Starting from the top, slide on narrow end
of pad. Attach sides of pad to the backrest’s locking
tabs.
Headrest Pad: Starting from the bottom, slip on pad and
pull over top of headrest. Attach the elastic straps to
the back of headrest.
Assemble backrest to seat base (see “Reinstalling
Backrest” section). Assemble headrest to backrest (see
“Preparing Child Restraint” section. Rethread harness
system (see “Reinstall Harness System” section).
Hand wash with warm sudsy water, rinse clean and air
dry. Do not use bleach or other harsh cleaners. Do not
dry clean.
Spot clean harness straps and armrests. Do not machine
wash.
Replace Seat Pad
66 67
4358-3832A US Prospect 2/23/06 10:18 AM Page 69