Dorel Juvenile Group 4358-3832A - Manual (Page 8)

Preparing Child Restraint
2
Backrest to Seat Base
Assembly
Place child restraint on the
floor.
Rotate seat back to the
upright position with one
hand while holding the
harness straps away from
child restraint with the
other hand.
3
Align the seat back locks
with the holes in the seat
base.
4
From the front of the child
restraint, with one hand,
make sure seat base pad is
out of the way of the seat
back locks. Grasp seat
back with the other hand
and push down evenly and
firmly until it locks into
place. Pull up on seat back
to make sure it is locked.
continued on next page.
1
Set headrest aside.
Pull seat pad over both
cup holders.
12 13
4358-3832A US Prospect 2/23/06 10:18 AM Page 15