Kiddy Sport'n Move - Manual (Page 12)

ENG
6. Utalization with carrycot
6.1 First assembling of the carrycot
Remove the mattress and the fabric cover from the border of the carrycot.
Pull the support clamps in outward
direction (fig. 18) untill they are
engaged in the holders.
Place the fabric cover on the border
of the carrycot and insert the mat-
tress.
Periodically check that the
support clamps are engaded
in the holders.
6.2 Mounting the carrycot on the chassis
WARNING: The carrycot may only be used for children from birth up
to maximum weight of 20 lbs (9 kg).
WARNING: The carrycot is suitable only for a child who can not sit
up unaided, roll over and can not push itsself up on its hands and
knees.
WARNING: Unfold the stroller like described in section 3.1 and set
the parking brake.
If you have used infant carrier adap-
tors, they have to be removed.
Insert both fixation bolts (left and
right side) into the channels on the
chassis (fig. 19).
WARNING: Ensure both
locking devices are engaged
before use!
fig. 18
12
fig. 19