Kiddy Sport'n Move - Manual (Page 18)

ENG
18
Now insert the plastic clip into the
hole in the required height (fig. 31).
WARNING: The plastic clip
must lay flat on the backside
of the backrest.
WARNING: Make sure that
both shoulder belts are fixed
in the same height.
8. Care and maintenance
8.1 Care and maintenance of the chassis
Periodically check the chassis on loose screws, rivets or worn out or defec-
tive parts.
Don’t use your kiddy sport’n move when you noticed a defect. Defective parts
have to be changed or repaired before the next using.
If a wheel is squeaking, spray some liquid silicone lubricant on the axles.
Wipe off unnecessary lubricant.
Your kiddy sport’n move chassis can be cleaned with a mild cleanser or with
a damp cloth. Never use caustic cleansing agents (e.g. solvents, strong
detergents).
8.2 Care and maintenance of the carrycot
Periodically check the carrycot on open seams or other defects.
The carrycot can be cleaned with a mild cleanser or with a damp cloth. Never
use stringent cleansing agents (e.g. solvents, strong detergents).
The inner fabric cover and the mattress are removable. This cover parts are
machine washable in cold water on the delicates cycle. Do not spin or tum-
ble dry. Dry the parts at room temperature.
fig. 31