La Crosse Technology 308-1414B - Manual (Page 8)

Model: 308-1414B/308-1414W www.lacrossetechnology.com/support Page | 8

OUTDOOR HIGH alert will flash. Press the ▼ or ▲ buttons to set the alert
value, and press the ALERT button to confirm. Then press the ALERT button
again switch to OUTDOOR LOW setting.

OUTDOOR LOW alert will flash. Press the ▼ or ▲ buttons to set the alert
value, and press the ALERT button to confirm. Then press the ALERT button
again switch to INDOOR HIGH setting.

INDOOR HIGH alert will flash. Press the ▼ or ▲ buttons to set the alert
value, and press the ALERT button to confirm. Then press the ALERT button again
switch to INDOOR LOW setting.

INDOOR LOW alert will flash. Press the ▼ or ▲ buttons to choose the value, and
press the ALERT button to confirm and exit.
Note: After selecting temperature alert values use the next step to turn individual alerts
ON or OFF.
Arm/Disarm Temperature Alerts

In normal time mode, press and release the ALERT button to toggle between:
o
Outdoor HI
o
Outdoor Lo
o
Indoor HI
o
Indoor LO

Press the ▲ button to arm the selected alert.

The alert bell appears when each alarm is activated.

Press the ▼ button to disarm the selected alert.

OFF will show in the Alerts area if no alert is active.
Temperature Alert Sounds

When temperature alert sounds, the corresponding alert bell will flash.

The alert beeps once every minute, until the temperature is out of alert range.

Press any button to stop alert. The alert bell will still show.

Disarm Alert: In normal mode, hold and release the ALERT button to select the alert
to disarm. With HI or LO alert selected, press the ▼ button disarm alert.
Adjust Backlight (HI-LOW-OFF)
When using AC power:
 Press the HI/LOW/OFF button to adjust the backlight:
When using Battery power only:
 Press the HI/LOW/OFF button for 10 second backlight.
Time Alarm Set
Hold the ALARM button for 5 seconds to enter the alarm time set mode.
1. The alarm hour digit will flash in the time display.
2. Press and release the ▼ or ▲ buttons to select the hour.
3. Press and release the ALARM button to set the minutes.
4. The minute digits will flash.
5. Press and release the ▼ or ▲ buttons to select the minutes.
6. Confirm with the ALARM button and exit.
7. The bell icon will show indicating the alarm is active.
8. The bell icon will flash when the alarm is sounding.