La Crosse Technology 308-1412s - Manual (Page 2)

Model: 308-1412 www.lacrossetechnology.com/support Page | 2
INITIAL SETUP
Step 1: Insert the included 5-volt AC power adapter into the forecast
station and then into wall outlet.
Step 2: Insert 3 new “AAA” batteries (not included) into the forecast
station. Observe the correct polarity.
Step 3: Insert 2 new “AA” batteries (not included) into the TX141TH-Bv2
transmitter. Observe the correct polarity. The red LED will flash
when transmitting.
Step 4: After 5 minutes place the sensor in a shaded outdoor location.
SET TIME, DATE AND TEMPERATURE UNITS
1.
Hold the SETTINGS button to enter time set mode.
2.
To adjust values press the UP or DOWN ARROW button.
3.
Press the SETTINGS button to confirm adjustments and move to
next item.
Settings order: 1. 12/24 Hour Time Format, 2. Hour, 3. Minutes, 4. Year,
5. Month, 6. Date, 7. Fahrenheit/Celsius
Press the SETTINGS button to exit, or wait 20 seconds without pressing
buttons to return to the normal time display.
SET TEMPERATURE ALERTS
1.
Hold the TEMP ALERTS button until the station beeps.
2.
The temperature alert value will blink in set mode.
3.
To adjust alert values press the UP or DOWN ARROW button.
4.
Press the TEMP ALERTS button to confirm & move to the next alert.
The temperature alert order:
1. Outdoor High, 2. Outdoor Low, 3. Indoor High, 4. Indoor Low
Press the TEMP ALERTS button to exit, or wait 20 seconds without
pressing buttons to return to normal time display
ARMS/DISARMS TEMPERATURE ALERTS
Press & release the TEMP ALERTS button to toggle between the alerts
Outdoor HI / Outdoor LOW / Indoor HI / Indoor LOW
 Arm the alert with the UP ARROW button.
 Disarm the alert with DOWN ARROW button.
 ALERT BELL ICON appears when armed.
High & Low Alerts
Armed
High & Low Alerts
Disarmed