La Crosse Technology C85183 - Manual (Page 6)

6
Alarm Time
Set Time Alarm
In normal mode, press and release the ALARM button once to show alarm time.
The letters “AL” will
show in the seconds display. Hold the ALARM button for three seconds to enter alarm set mode.
1. The Hour will flash.
2. Use the + or - buttons to set the hour.
3. Press the ALARM button to confirm and switch to minutes.
4. The Minutes will flash.
5. Use the + or - buttons to set the minutes.
6. Press ALARM button to confirm.
7. Press the °F/°C SET button to return to normal mode
Note: When no buttons are pressed for ten seconds, the atomic
alarm clock will save the last change and default back to normal
mode.
Activate/Deactivate Time Alarm
Press and release the ALARM button once to show Alarm Time.
Activate: With the Alarm Time showing, press and release the ALARM button to activate the alarm.
The alarm icon appears when alarm is active.
Deactivate: With the Alarm time showing, press and release the ALARM button to deactivate the
alarm. The alarm icon will disappear when alarm is inactive.
Note: When the alarm sounds, it will continue for two minutes then shut off.
Snooze
When the alarm sounds, press the SNOOZE button to trigger snooze alarm for 10 minutes. The
snooze icon Zz will flash when the snooze feature is active.
To stop alarm for one day, press the ALARM button, while in snooze mode. The alarm icon will
remain solid.
Note: When the alarm sounds, press any button except the ALARM button to turn the alarm off.
Backlight
A/C Adapter
The backlight is on continuously when operating the atomic alarm clock with the 5-volt A/C adapter. The
backlight has three settings: High, Low and OFF for your viewing comfort.
Operating on A/C power
: The backlight is displayed constantly unless it is
turned off. Press and release the LIGHT (HI-LOW-OFF) button to adjust the
backlight intensity.
ON High intensity: The backlight is defaulted to HI when the adapter is in use.
ON Low intensity: Press and release LIGHT (HI-LOW-OFF) button once
OFF: Press and release LIGHT (HI-LOW-OFF) button
ON: Press and release LIGHT (HI-LOW-OFF) button again
Note: When the adapter is NOT in use, the High-Low-On-Off features are not available.
Battery Power
Operating on battery power: Press the LIGHT (HI-LOW-OFF) button to display the backlight for 10
seconds.
Note: The backlight will not stay on when operating on battery power.