La Crosse Technology C84612 - Manual (Page 14)

P a g e | 14
8. After waiting for 10 minutes, insert the batteries into the thermo-hygro sensor, and rain sensor
making sure to align the "+" symbol on the batteries with the markings on the battery cover and
inside the battery compartment.
9. Within 2 minutes of inserting the batteries into the sensors, insert the batteries into the display,
making sure to align the "+" symbol on the batteries with the markings inside the battery
compartment.
10. Wait 5 minutes for the outdoor weather data to display. If any of the outdoor data displays "--"
after waiting for 5 minutes, follow the "Setup Instructions" near the beginning of this manual or
in the Quick Setup Manual included with the product.
TO EXIT THE MANUAL SETTING MODE
To exit the manual setting at any time, either:
• Press the MIN/MAX button or the ALARM button to exit SET mode or
• Simply wait 30 seconds until the SET mode times out and returns to the Mode 1 display.
WE AT HER ALARM OPERAT IONS FOR T HE WEAT HER ST AT ION DISPLAY
The Weather alarms can be set when certain weather conditions are met. For example, you can set the
thresholds for the outdoor temperature to +104°F (high) and 14°F (low), while enabling the high alarm and
disabling the low alarm (i.e. temperatures <14°F won’t trigger alarm, but temperatures >+104°F will).
• When the value meets the condition for high alarm or low alarm, the alarm will ring for 2 minutes and
the value will blink, along with the corresponding icon ("HI AL"/ "LO AL").
• Press any button to stop a ringing alarm.
• The high and low alarms can be switched On/Off independently, according to the need.
• If at any time during the alarm setting process you would like to exit alarm setting mode, press the
MIN/MAX button or wait for about 30 seconds and the display will return to normal display mode
automatically.
• Press the ALARM button to enter ALARM mode. Subsequent presses of the ALARM button will
advance to the next weather alarm section.
Note: Monitoring & Alerts Activation with Online Instructions: www.lacrossealerts.com . Remote
Monitoring and Alerts Activation Card has instructions and the needed activation key to enable this
feature.
THE FOLLOW ING W EATHER ALARMS CAN BE SET IN ALARM MODE
• High and Low pressure alarms
• High and Low indoor temperature alarms
• High and Low indoor humidity alarms
• High and Low outdoor temperature alarms
• High and Low outdoor humidity alarms
• High wind gust alarm
• Wind direction alarm
• Rainfall amount in 24 hour period alarm
Note: The storm alarm is set in the program menu.
DEFAULT W EATHER ALARM VALUE
Pressure
Low 28.35 inHg Wind Gust High 62.0mph
High 30.71 inHg Wind Direction North