La Crosse Technology K84322 - Manual (Page 6)

La Crosse Technology Page 6
Temperatures will be reset to current temperatures.
• View MAX data: Press and release the MAX button to view the maximum Indoor and Outdoor
Temperatures. After ten seconds the LCD will return to the current temperatures.
• Reset MAX data: Hold the MAX button for 3 seconds and the Indoor and all Outdoor
Maximum Temperatures will be reset to current temperatures.
Note: When no buttons are pressed for ten seconds, the temperature station will return to
display the current temperature.
Low Battery Icon
• When the low battery icon
appears in the indoor (IN) reading section, replace the batteries in the
weather station.
• When the low battery icon appears in the outdoor (OUT) readings section, replace the batteries in
the outdoor transmitter.
Temperature Alerts
Alert values are set when they flash in the outdoor temperature area. Temperature alerts are turned on or
off in the Temperature Alert box.
One or all the temperature alerts may be set.
Range for outdoor temperature alert:
-40°F to 140°F (-40°C to 60°C)
Select Temperature Alert Values
Hold the TEMP ALERTS button for three seconds, until the temperature station
beeps, to enter alert setting.
 OUTDOOR HI alert will flash where the outdoor temperature shows. Press the MAX or MIN
buttons to set the alert value, and press the TEMP ALERTS button to confirm. Then press the
TEMP ALERTS button again switch to OUTDOOR LOW setting.
 OUTDOOR LO alert will flash where the outdoor temperature shows. Press the MAX or MIN
buttons to set the alert value, and press the TEMP ALERTS button to confirm and exit.
Note: After selecting temperature alert values, use the next step to turn individual alerts ON or
OFF.
Temperature Alerts ON/OFF
From normal time and temperature display mode, press and release the TEMP
ALERTS button to toggle between:
o Outdoor HI
o Outdoor LO
 Press the MAX button (Alert ON) to turn the selected alert ON.
 The alert icon appears when alarm is activated.
 Press the MIN button (Alert OFF) to turn the selected alert OFF.
Note: When no temperature alerts are set the Temperature Alert area will show OFF.
Temperature Alert Sounds
 When temperature alert is ringing, corresponding alert icon will flash.
 The alert will ring for five seconds every minute, until the temperature is out of alert range.
 Press any button to stop alert. The alert icon will still show.
 Turn Alert OFF: In normal mode, press and release the TEMP ALERTS button to select the alert to
turn off. With HI or LO alert selected, press the MIN button to turn that alert OFF.