La Crosse Technology UV100 - Manual (Page 5)

17
18
19
20
7.0 Chronograph Mode - Chronograph Mode
6.1 Daily Alarm Mode - Setting the Daily Alarm Mode
! To set the Daily Alarm Time, press and hold the
[mode] button to select the setting display.
! When the 'minute' digits flash on the display,
press the [start/stop] or [lap/reset] button to set
the minute by scrolling of 1 (hold down the button
to scroll the setting faster).
! When the 'hour' digits flash on the display, press
the [start/stop] or [lap/reset] button to set the hour
by scrolling of 1 (hold down the button to scroll
the setting faster).
! When the setting is finished, press and hold
the [mode] button to exit the setting sequence.
! The setting display will change to Daily Alarm
Mode automatically if no key-stoke has been
activated for about 3 minutes.
Daily Alarm Sound
! When the daily alarm is ON, the watch starts
beeping at the alarm time for about 30 seconds.
! When the beeps sounds, it can be stopped
prematurely by pressing one of the buttons,
except the [light] button.
6.0 Daily Alarm Mode - Daily Alarm Mode
Daily Alarm Mode
(Alarm OFF & Chime OFF)
Daily Alarm Mode
(Alarm ON)
3. Lap time
(1 lap only)
time
[start/stop]
[start/stop]
[start/stop]
[start/stop]
[start/stop]
[start/stop]
[start/stop]
0 10 20 30 40
[lap/reset]
[lap/reset]
2. Accumulative
elapsed time
1. Elapsed time
!
1) Elapsed time,
2) Accumulative elapsed time, and
3) Lap time (1 lap only)
Chronograph Display
! The display shows the 'Zero' display, if the Watch
or the chronograph has been reset.
! The Chronograph Mode Indicator exhibits on the
upper row of the display.
! The chronograph time (hours, minutes, seconds
and 1/100 second) exhibits on the lower row of
the display.
! T h e m a x i m u m c o u n t i n g r a n g e o f t h e
chronograph is 9 hours, 59 minutes and 59.99
seconds.
This Watch includes a Chronograph Mode, it can
measure 3 different types period of time:
30 0
20
20 10 0
10 0 10
Mode Indicator
Chronograph Time
(1/100 Second)
Chronograph
Time (minute)
Chronograph
Time (hour)
Chronograph
Time (second)
[start/stop]
Current Time
Alarm
Time Mode
Indicator
! This Watch includes a daily alarm for user's
convenience. The daily alarm can be set by the
user.
! Check the coming '6.1 Setting the Daily Alarm
Mode' Section for more detail on how to set the
Daily Alarm Mode.
The Daily Alarm Display
! The Current Time (hours, minutes) shows on the
upper row of the display.
! The Alarm Time (hours, minutes) shows on the
lower row of the display.
! Press the [lap/reset] button once to select
between ON and OFF the hourly chime. When
the Hourly Chime Indicator ' ' appear
s, the
hourly chime is ON (the Watch will beep once on
the hour).
To Select between ON and OFF the Daily Alarm
! Press the [start/stop] button once to set between
ON and OFF the Daily Alarm. When the Daily
Alarm Indicator ' ' appear
s, the daily alarm is
ON (the watch starts beeping at the alarm time for
about 30 seconds).
To Select between ON and OFF for the
Hourly Chime
scroll the
setting by
increment of 1
Hour Minute
hold
[mode]
hold
[mode] [mode]
[mode]
scroll
the setting
faster
scroll
the setting
faster
[start/stop]
[lap/reset]
hold
[start/stop]
hold [lap/reset]
Daily Alarm Mode
Setting Sequence
Daily Alarm Mode
Chronograph Mode
(Zero Display)
Elapsed Time, Accumulative Elapsed Time and Lap Time
: Stop Counting : Counting
Daily Alarm
Indicator
scroll the
setting by
decrement of 1
[lap/reset]
Daily Alarm Mode
(Chime ON)
Hourly Chime
Indicator
5.10 UV Index Mode - Calibrating the UV Index
scroll the
setting by
increment of 1
'LO' Lower
UV Index
Alarm
'CAL'
Calibration
'HI' Upper
UV Index
Alarm
hold
[mode]
hold
[mode]
[mode]
[mode]
[mode]
scroll
the setting
faster
scroll
the setting
faster
[start/stop]
[lap/reset]
hold
[start/stop]
hold [lap/reset]
UV Index Mode
Setting Sequence
UV Index Mode
(Current UV Index Display)
scroll the
setting by
decrement of 1
To Calibrate the UV Index
! When the settings of the previous '5.7 Setting the
Upper and Lower UV Index Alarms' Section
are finished, press the [mode] button once to
calibrate the UV Index.
! When the 'CAL' indicator appear s, press the
[start/stop] or [lap/reset] button to select the pre-
determined CAL between 0 to 50 by scrolling of 1
(hold down the button to scroll the setting faster).
Check the previous '5.9 To Determine the
Calibration Factor (CAL)' for more detail on how
to determine the CAL.
! When the above settings finished, press and hold
the [mode] button for about 2 seconds to exit the
setting sequence.
! The setting display will change to UV Index Mode
automatically if no key-stoke has been activated
for about 3 minutes.