La Crosse Technology UV100 - Manual (Page 6)

21
22
23
24
8.2 Timer Mode - Using the Timer
! This Watch includes a countdown timer for
timekeeping a fixed period of time (target time).
The Target Time
! The target time is the time which the timer start
down-counting from.
! The target time can be set by the user, and its
setting limit is 23 hours, 59 minutes 59 seconds.
! Check the coming '8.1 Setting the Timer Mode'
Section for more detail on how to set the Timer
Mode - Target Time.
Timer Display
! The Timer Mode Indicator exhibits on the upper
row of the display.
! The target time (hours, minutes and seconds)
exhibits on the lower row of the display.
8.0 Timer Mode - Timer Mode
8.1 Timer Mode - Setting the Timer Mode
! If a target time has been set (for example 30
minutes), press the [start/stop] button once to
start the countdown. When it is counting, press
the [start/stop] button once to stop the counting.
! As long as the timer is counting, the countdown
time will be displaying on the display continuously.
To Reset the Timer
! To reset the timer to the preset target time before
counting to zero, press the [lap/reset] button
once when the timer is stopped.
! To count from a new target time, set a new value
for the target time. Check the previous '8.1
Setting the Timer Mode' Section for more detail
on how to set the Timer Mode.
Timer Alarm Sound
! When it counts to the last 5 seconds, the Watch
will beep once for every second. When it is zero,
the Watch will beep for about 10 seconds.
! During this 10 seconds beep sound, it can be
stopped prematurely by pressing one of the
buttons except the [light] button.
Note: The adjacent diagram illustrates the flow
among different functional displays only, hence,
these displays DO NOT conform to fact in all
instances.
Timer Mode
Timer Mode
To Set the Timer Mode
! To set the target time for the Timer Mode, press
and hold the [mode] button for about 2 seconds to
select the setting display.
! When the 'hour' digits flash on the display, press
the [start/stop] or [lap/reset] button to set the hour
by scrolling of 1 (hold down the button to scroll
the setting faster).
! When the 'minute' digits flash on the display,
press the [start/stop] or [lap/reset] button to set
the minute by scrolling of 1 (hold down the button
to scroll the setting faster).
! When the 'second' digits flash on the display,
press the [start/stop] or [lap/reset] button to set
the second by scrolling of 1 (hold down the button
to scroll the setting faster).
! When the setting is finished, press and hold
the [mode] button to exit the setting sequence.
! The setting display will change to Timer Mode
automatically if no key-stoke has been activated
for about 3 minutes. scroll the
setting by
decrement of 1
scroll the
setting by
increment of 1
Minute Hour
Second
hold
[mode]
hold
[mode]
[mode]
[mode]
scroll
the setting
faster
scroll
the setting
faster
[start/stop]
[lap/reset]
hold
[start/stop]
[mode]
hold
[lap/reset]
Timer Mode
Setting Sequence
counting
stop
counting
stop
counting
Timer Mode
(Counting)
Timer Mode
(Stop-Counting)
Timer Mode
(Stop-Counting)
Timer Mode
(Stop-Counting)
[start/stop]
[lap/reset]
[start/stop]
[lap/reset]
29'59"
beeps
set the
target
time to
30 minute
Timer Mode
(Zero Display)
Mode
Indicator
Target Time
(Hour, minute, second)
beep
beep
3. Reset to
preset
target time
time
[start/stop]
[start/stop]
[start/stop]
[start/stop]
[start/stop]
[start/stop]
[lap/reset]
0 10 20 30 40
2. Multi-phases
down
counting
1. Single-phase
down
counting
30
30
30 30
0
20
20
20 0
Single/multi-down Counting & Reset
: Stop Counting : Counting
! In 'Zero' Display, press the [start/stop] button
once to start the counting. When it is counting,
press the [start/stop] button once again to stop
the counting, and the elapsed time of which the
chronograph is counting will appear.
! When the elapsed time is displaying, repeat the
above mentioned key operations to get the
accumulative elapsed time or press the [lap/reset]
button to reset the chronograph (ready for a new
counting). Check the below 'To Reset the
Chronograph' Section for more detail on how to
reset the chronograph.
To Get the Lap Time
! When the chronograph is counting in the previous
operations, press the [lap/reset] button to get the
Lap Time Display (the ' ' and ' ' start flashing).
When the Lap Time is displaying, the
chronograph is counting in the background.
! In Lap Time Display, press the [lap/reset] button
once to return to the Counting Display. When the
Counting Display return, press the [lap/reset]
button at any designated moment to get a new
lap time (the previous lap time will be erased).
To Reset the Chronograph
! To reset the chronograph to 'Zero' Display, press
the [lap/reset] button once when the chronograph
is stopped counting.
Note:
This diagram illustrates the flow
a m o n g d i f f e r e n t f u n c t i o n a l
displays only, hence, these
displays DO NOT conform to fact
in all instances.
7.1 Chronograph Mode - Using the Chronograph
[start/stop]
[start/stop]
[lap/reset]
[lap/reset]
Chronograph Mode
('Zero' Display)
Chronograph Mode
(Counting Display)
Chronograph Mode
(Lap Time Display)
Chronograph Mode
(Stop Counting Display)
counting
Lap Time
(the chronograph
is counting in the
background)
flash
Elapsed Time
(the chronograph
is stop counting)