La Crosse Technology WS-2317 - Manual (Page 26)

26
rainfall total value to zero and the time recording to
current time.
The second case is Rainfall 24h or 1h, which records
maximum rain count only for these respective times.
Pressing the MINUS
(-) key in either of these two modes will reset the rain
count to the current rain count and time and date.
15.
Alarm Programming Modes
Alarm Modes
As well as the normal time alarm, this feature will allow users
to set a range of specific alarms to meet specific weather and
temperature conditions set by the user. The weather station
allows for the following 13 alarms modes to be set:
1. Time alarm
2. Indoor temperature high alarm and low alarm
3. Outdoor temperature high alarm and low alarm
4. Indoor humidity high alarm and low alarm
5. Outdoor humidity high alarm and low alarm
6. Wind chill high alarm and low alarm
7. Dew point alarm high alarm and low alarm
8. Rainfall 24h alarm
9. Rainfall 1h alarm
10. Pressure high alarm and low alarm
11. Wind speed high alarm and low alarm
12. Wind direction alarm
13. Storm warning alarm
Setting Alarms
For alarm setting, press the ALARM key once while in normal
operation mode to enter the normal alarm time and by further
pressing the ALARM key will toggle through each of the alarm
modes:
Note:
The alarm icon will automatically appear upon pressing
the SET key to tell the user the alarm is activated. Further
pressing the SET key will deactivate/reactivate the alarm.