La Crosse Technology WS-7015 - Manual (Page 2)

Table of Contents
Pages
1.
Introduction……………………………………………………………. 26
2. Intended Use…………………………………………………………… 26
3. Safety Notes……………………………………………………………. 28
4. Product Description…………………………………………………... 28-29
5. Shipment Contents…………………………………………………… 30
6. Description of Measuring Devices…………………………………. 30-31
7. Mounting………………………………………………………………… 31-34
8. Setting Up………………………………………………………………. 34-36
9. Display Overview……………………………………………………… 37
10. Operation……………………………………………………………….. 38-41
11. Programming Mode…………………………………………………… 41-42
12. Calibration………………………………………………………………. 42-45
13. Battery Change………………………………………………………… 45-46
14. Interferences…………………………………………………………… 46-47
15. Transmission Range………………………………………………….. 47
16. Cleaning and Maintenance…………………………………………... 47
17. Disposal…………………………………………………………………. 48
18. Specifications………………………………………………………….. 48
3. Safety Notes
Any damages caused by failure to comply with this Operation
Manual will lead to invalidation of guarantee! We furthermore
cannot be held liably for any conseqential damages causes by
this!
In case of damages to personnel or property caused by improper
handling or failure to comply with the safety notes in this manual
we cannot be held liable. In any such case the guarantee will
invalidate.
For reason of safety and licensing (FCC) any modification and/or alteration of the device
is strictly forbidden.
Only Type Mignon AA, IEC LR6, 1.5V batteries (preferrably alkaline batteries) may be
used to power the Indoor Sensor and Base Station.
Do not expose the Base Station to high temperatures, moisture or severe vibration as well
as to any mechanical stress.
Do not leave used-up batteries in the device since even leakproof batteries may corrode
and set free chemicals which may be dangerous to your health and may also ruin the
device.
Incorrect polarity of the batteries will in any case lead to immediate destruction of the unit.
This product as well as the installed batteries are no toys and must be kept out of the
reach of children.
Do not expose batteries to open fire because of danger of explosion.
This product is not to be used for medical purposes or for public information.
Do not put the Base Station into operation immediately after it has been moved from any
cold environment to a warm room. The condensed water possibly developing may under
unfavorable conditions damage the device. Leave the device switched off until it has
reached room temperature.
4. Product Description
The Professional Remote Weather Station represents an extremely comfortable high
quality Universal Weather System able to collect, process and display data from up to 9
external Remote Temperature and Humidity Sensors as well as one Remote Wind Sensor
and one Remote Rain Volume Sensor.
Measuring capabilities of the Weather Station
-
Room temperature and humidity with air pressure as well as one of 8 further
temperatures with assigned humidity.
- Temperature selectable in degree Fahrenheit or Celsius
- Up to 9 different combined humidity/temperature measuring points of which two can
be simultaneously displayed.