La Crosse Technology WT-5442 - Manual (Page 11)

10
you to an automated time, announced at the top of the minute in
“Coordinated Universal Time”, which is also known as Greenwich
Mean Time (GMT). This time does not follow Daylight Saving Time
changes. After the top of the minute, a tone will sound for every
second.
8. It is possible that your Projection Alarm may not be exactly on the
second due to the variance in the quartz. However, the clock will
adjust the quartz timing over the course of several days to be very
accurate; under 0.10 seconds per day.
C. PROJECTION OF TIME AND/OR REMOTE TEMPERATURE
1. When plugged into an AC outlet, the projection alarm can
continuously project the time and/or remote temperature.
2. When operating on batteries alone, the Projection Alarm will only
project when a button is pressed.
3. The projection will auto-focus for display from three to six feet away.
A dark surrounding will be necessary to clearly see the projection.
4. The default is projecting time (Hour and Minutes). The Projection
Alarm can be set to project the time (M0), remote temperature (M1),
or alternating between time and remote temperature (M2) by
pressing and releasing the “DISPL” button. The selected display
mode will flash on the lower middle as “M0”, “M1” or “M2”.
5. The direction of the display can also be rotated 360
° in 90°
increments by pressing the directional button. There is no display on
the LCD that signifies the direction.
6. The projector case can be rotated 180
° to further help orient the
projected display.
7. The intensity of the projection can be adjusted to three different
settings as well as turned “off” by pressing the light Intensity button.
When turned off, the projection will only come on when a button is
pressed. The intensity cannot be set for the projected display when
set to “off”. When only batteries are used, the intensity setting is set
to “off” with no other options
.
Light intensity Display Mode Display Direction