LD Systems LDSAT42G2(W) - Manual (Page 8)

8
ENGLISH
DEUTSCH
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
ESP
AÑOL
POLSKI
IT
ALIANO
3
5
6
2 1
4
7
CONNECTORS, CONTROLS, AND INDICATORS:
LDSAT62AG2(W):
(LDSAT62AG2 shown)
1 POWER SOCKET
IEC power socket 220V-240V with built-in fuse
holder.
IMPORTANT INFORMATION: Replace the fuse only
with a fuse of the same type and rating. If the fuse
blows repeatedly, please contact an authorised
service centre.
2 POWER
On / off switch. Before switching the active
speaker on or off, always adjust the volume to
zero (MAIN LEVEL all the way to the left).
3 BALANCED LINE INPUT
Balanced line input (XLR / 6.3 mm TRS combo) for
connecting an external audio source (e.g., mixer).
4 DIRECT OUT
Balanced XLR line output for looping through the
input signal.
5 MAIN LEVEL
Volume control
6 POWER MODE
Toggles between continuous operation (ON) and
auto mode (AUTO). In the AUTO position, the
amplifier of the speaker system switches on auto-
matically as soon as a signal is received. If there
is no signal for several minutes, the amplifier
switches to standy mode.
7 POWER LED
The LED lights up red if the unit is switched on
and is in AUTO mode, but no signal is present.
Once a signal is present, the LED changes colours
to green.
The LED also lights up green if the unit is
switched on and is in ON mode.