Legrand 6ATC 8 - Manual (Page 4)

4
Step 1 Insert Stem Assembly into core hole.
INSTALLING STEM ASSEMBLY AND SEPARATE COVER
Step 2 Remove disposable plate and (2) plate clips by
removing the 8-32 screws. Install Flange using
the (2) 8-32 x 1/2” Cap Head screws provided
with the cover assembly.
Step 1 Slide divider into slots in body of Poke
Thru. Two sets of slots are provided.
Either set may be used.
INSTALLING DIVIDERS
Step 2 Two dividers are provided for the bottom of
the Poke Thru. Use the shorter divider on top
of Wire Tunnel. Use the longer divider when
separating channels without the Wire Tunnel.
To install, turn divider at an angle to place
inside the Feed Housing. Once inside, twist the
divider to align with holes in the Feed Housing.
Attach using (2) # 8-32 screws.