Legrand 6ATC 8 - Manual (Page 8)

8
Step 1 Remove (2) 8-32 screws and pull off Feed
Plate or housing. Step 2 Use (2) 8-32 screws to install new Feed Plate
or housing
CAUTION: To maintain fire classification, Feed Plates must
be installed.
CAUTION: To maintain fire classification, Feed Plates must
be installed.
Step 1 Remove cover assembly from Poke Thru
by removing (2) 8-32 screws and lifting
cover off.
CONFIGURING FEED PLATES
Step 2 Remove Poke Thru from floor by bending tabs
inward and pulling unit up.