Legrand RC9AM2TC User Manual
Page 2
Advertising
Step 5. Remove screw plug and replace with
Step 6. Attach conduit, pull wires and the
a 1 1/4 trade size conduit connector.
installation is complete.
Replace
RC9114TCLJB Poke-Thru
(Applies to installations in the City of Chicago or other locations where local codes
require the use of EMT compression fittings, and a junction box suitable for use in
environmental air spaces.)
Step 7. Follow steps 1 through 6 for installation.
Once unit is Pushed into the Cored Hole,
from Below, Install an EMT Compression
Fitting (Not Supplied) and Junction Box (Not
Supplied) to the Conduit System. Complete
Installation Per NEC and Local Codes.
Advertising