Legrand OR-GXC422942-A1-B - Manual (Page 10)

Setting Up the Cabinet
Anchoring
(Optional) Anchor the cabinets to the
floor after it has been placed in the
desired location and is level. The
hardware to anchor the cabinet to the
floor is not supplied. Use proper anchors
for the type of floor where installed.
Tools: 3/8 Drive Socket, Socket Wrench,
and Level.
1. Attach the anchor brackets to the
cabinet, in both the front and the rear,
using the supplied Hex Head Flanged
Bolts. NOTE: The brackets must be
near or touching the floor.
2. Before fastening brackets to the floor,
make sure that the front and rear doors
can open and close. Make adjustments
to the brackets as necessary so that all
doors open and close.
3. Using a level check that the cabinet is
plumb. Make adjustments to levelers
as necessary.
Optional Method: Anchor brackets can
be mounted inside the cabinet. See
illustration on the left.
¼ – 20 Hex
Head Flanged Bolts
Anchor Brackets:
Long side to
the cabinet
Anchor Brackets
Without Casters:
With Casters:
Anchor Brackets
9
Rev. 00 - 11/11