Setting up the cabinet – Legrand OR-GXC422942-A1-B User Manual
Page 15
Advertising
Setting Up the Cabinet
Ganging the Cabinets
Tools: 3/8 Drive Socket and Wrench
Hardware: ¼-20 Flange Hex Screws
(8 qty)
1. Position and level the adjacent cabinet.
The cabinets must be aligned both
vertically and front to back.
2. Locate 4 clearance holes in the
corner post on left side of the frame
(facing front or rear) inside the cabinet.
Insert screws into these holes and
fasten to pre-installed nuts on the
adjacent cabinet.
3. Bolt the cabinets together using
¼-20 x ¾” Long Flanged Hex screws
(8 total qty – 4 front & 4 rear).
¼-20 Flanged Hex
Screws (8 Pls)
14
Rev. 00 - 11/11
Advertising
This manual is related to the following products: