Legrand OR-GXC422942-A1-B - Manual (Page 14)

Setting Up the Cabinet
Top Panel – Removing and Installing
Tools: Phillips Screw Driver
1. Disconnect the bonding conductor
located at the rear or front of
the cabinet.
2. Loosen or remove the 4 screws with
a phillips screw driver on both sides
of the cabinet.
3. Push up on the Top Panel and remove.
4. Reverse steps to install the to panel.
Bonding Conductor
Pan Head Screws
(4 Pls)
13
Rev. 00 - 11/11