Legrand DS4000 Obstacle Avoidance - Manual (Page 2)

2
To use the DS4075 as a transition to Wiremold 500 Series or 700 Series Raceway:
Step 1. Install 500/700 Adapter into the opening with supplied
screws. If using power in both channels, seal off the
other channel with another 500/700 Adapter.
Step 2. Install 500 Series Raceway per instructions.
Step 3. To cross over from the top Channel, remove the
Knockout and install provided Grommet.
Step 4. Install Shroud to isolate Cables as shown.
Step 5. Install DS4000C Cover and DS4075 Fitting Cover to
complete installation.
NOTE: To remove Cover or install a Tamper Resistance Kit, refer to page 6 of this instruction sheet.