Legrand DS4000 Obstacle Avoidance - Manual (Page 3)

3
To use the DS4075 as a transition to Wiremold 2400 or 2400BD Series Raceway:
Step 1. Install DS4075 as before. Install 2400 Adapter in one
channel for single service. For power and data, use
2400BD Series Raceway.
2400BD Channel Option A: Power from Top Channel.
2400BD Channel Option B: Communications from
Top Channel.
Step 2. Route wiring through knockouts and into 2400 Series
Raceway. Install Covers to complete installation.
NOTE: To remove Cover or install a Tamper Resistance Kit, refer to page 6 of this instruction sheet.